Plate Compactor Parts

Plate compactor parts for the vibratory plates most common on Las Vegas jobsites — Multiquip MVH-series reversibles, Wacker Neuson WP-series, and Mikasa MTX machines. Belts, shockmounts, clutches, exciter parts, and seals, with same-day shipping on orders placed by 12 PM.

A vibratory plate lives a hard life — caked in dust, beaten by its own vibration, and rarely serviced until something lets go. This section covers the models we see most: Multiquip MVH302, MVH306, MVH402, MVH408, MVH502, and MVH508 reversibles and MVC77, MVC82, and MVC88 forward plates; Wacker Neuson WP1540, WP1550, and WP1550AW with the WM170 engine; and Mikasa MTX60 through MTX90.

What's in this section

• Drive belts — cogged and V-belts, like #BLT22490 for the MVH508, #BLT22460 for the MVH502, and #BLTB27 for the Wacker WP1550, plus tensioners, belt covers, and guards
• Shock absorbers and shockmounts — large round shocks for the MVH508 (#939010370) and Wacker WP1550 shockmounts (#5100016316)
• Clutch assemblies — MVH502 (#457333701) and MVC80VHW/MVC82
• Engine wear parts — standard and .50 mm oversize piston rings for the Wacker WM170/WP1540, Hatz fuel caps, air cleaner covers and housings
• Seals, O-rings, and packings — vibrator cover O-rings (WP1550AW), oil seals, O-ring and dust seal kits
• Controls — throttle cables, cable assemblies, speed controllers, stop switches
• Shafts and linkage — stub shafts, control shafts, spindles, rod ends, selector valves
• Mikasa MTX rammer parts — bellows, main springs, crank gears, shoe/foot assemblies (#KIT8511S), and full service kits (#FKITMTX1)

Match by model, then by part number

Start with the model designator on the machine's data plate — MVH508, WP1540, MTX70. Every listing in this section carries the OEM part number in the title, so you can confirm against your parts book before ordering. Many listings show both Mikasa and Multiquip names on the same part; that's normal — MQ plates are Mikasa-built, and the numbers cross over. Shockmounts are the most common wear item on any vibratory plate; when one goes, replace them as a set. For everything else by brand, see Multiquip parts and Wacker Neuson parts, or rammer and tamper parts for upright rammers.

Can't find your number? Call (702) 798-4149 with the model and serial. Orders placed by 12 PM ship the same business day; counter pickup at 3802 Civic Center Dr., North Las Vegas.

Not sure what fails first? Read the plate compactor parts guide, or browse Mikasa plate compactor & rammer parts.