Pressure washer replacement guns, lances, hose, and nozzle tips, sold individually and shipped the same day on orders placed by 12 PM. These are the wear items that fail first on any washer: trigger guns, spray tips, and high-pressure hose.
What's in this section
- Trigger guns — shutoff and straight (linear) shutoff guns rated 4000 PSI at 7 to 12 GPM, 3/8" FPT inlet and 1/4" FPT outlet, plus an open no-trigger gun for wand setups
- Lances — zinc-plated steel, 1/4" MPT, in 12", 36", 48", and 59" lengths
- High-pressure hose — 1-wire (4000 PSI) and 2-wire (6000 PSI) black hose, 3/8" inner diameter, bend restrictors — the 1-wire swivel both ends, the 2-wire swivel-by-solid, in 50 ft. and 100 ft. lengths
- Nozzle tip sets — 4- and 5-packs in 3.0, 3.5, 4.0, and 4.5 orifice sizes
- Individual spray tips — 0° red, 15° yellow, 25° green, and a 15° stainless steel 1/4" MPT tip
Matching parts to your machine
Three numbers do the work. First, thread size: the guns here take a 3/8" FPT hose inlet and a 1/4" FPT lance outlet — check both ends before ordering. Second, hose rating: match wire count to your pump's output — 1-wire covers machines up to 4000 PSI, 2-wire covers up to 6000. Third, orifice size: a tip that's too small over-pressures the pump; too large and you lose cleaning power. Pull your washer's GPM and PSI off the pump plate and pick the orifice number from the manufacturer's nozzle chart, then choose spray angle by job — 0° for spot stripping, 15° for concrete, 25° for washdown.
Need a length or diameter not listed here? See the full pressure washer hose section. For engine-side service parts for gas-powered washers, see Honda engine parts.
Not sure which gun or tip your unit takes? Call (702) 798-4149 with the make and pump specs. Orders placed by 12 PM ship the same business day, and parts orders over $500 ship free. Counter pickup at 3802 Civic Center Dr., North Las Vegas, Mon–Fri 7 AM–4 PM.